Intaglio print "Grace
"
Etching courtesy of Lionel
Lofton
Etching - Printing technique in which a metal plate
is first covered with an acid-resistant material, then
worked with an etching needle to create an intaglio
image. The exposed metal is eaten away in an acid bath,
creating depressed lines that are later inked for printing.
Lithography - was invented in
1798 in Germany by Alois Senefelder.
Lithography was the first fundamentally new printing
technology since the invention of relief printing in
the fifteenth century. It is a mechanical planographic
process in which the printing and non-printing areas
of the plate are all at the same level, as opposed to
intaglio and relief processes in which the design is
cut into the printing block. Lithography is based on
the chemical repellence of oil and water. Designs are
drawn or painted with greasy ink or crayons on specially
prepared limestone. The stone is moistened with water,
which the stone accepts in areas not covered by the
crayon. An oily ink, applied with a roller, adheres
only to the drawing and is repelled by the wet parts
of the stone. The print is then made by pressing paper
against the inked drawing.
Serigraphy (Silk-screen) - A
printing technique that makes use of a squeegee to force
ink directly onto a piece of paper or canvas through
a stencil creating an image on a screen of silk or other
fine fabric with an impermeable substance. Serigraphy
differs from most other printing in that its color areas
are paint films rather than printing ink stains. visit
www.charlotterilewebb.com
to see her exhibit of hand-pulled silkscreen prints.
Woodcut - Printing technique
in which the printing surface has been carved from a
block of wood. The traditional wood block is seasoned
hardwood such as apple, beech or sycamore. Woodcut is
one of the oldest forms of printing dating back to the
12th century.
Mezzotint - (mezzo = half + tinta
= tone), a reverse engraving process used on a copper
or steel plate to produce illustrations in relief with
effects of light and shadow. The surface of a master
plate is roughened with a tool called a rocker so that
if inked, it will print solid black. The areas to be
white or gray in the print are rubbed down so as not
to take ink. It was widely used in the 18th and 19th
centuries to reproduce portraits and other paintings,
but became obsolete with the introduction of photoengraving.
Monotype - One-of-a-kind print
made by painting on a sheet of metal or glass and transferring
the still-wet painting onto a sheet of paper by hand
or with an etching press. If enough paint remains on
the master plate, additional prints can be made, however,
the reprint will have substantial variations from the
original image. Monotype printing is not a multiple-replica
process since each print is unique. visit www.charlotterilewebb.com
to see her exhibit of mono-prints. Its a wonderful web
site.
Aquatint - Printing technique capable of producing
unlimited tonal gradations to re-create the broad flat
tints of ink wash or watercolor drawings by etching
microscopic cracks and pits into the image on a master
plate, typically made of copper or zinc. Spanish artist
Goya used this technique.
Blind - Printing using an uninked
plate to produce the subtle embossed texture of a white-on-white
image, highlighted by the shadow of the relief image
on the uninked paper. This technique is used in many
Japanese prints.
Collograph - Printing technique
in which proofs are pulled from a block on which the
artwork or design is built up like a collage, creating
relief.
Drypoint - Printing technique
of intaglio engraving in which a hard, steel needle
incises lines on a metal plate, creating a burr that
yields a characteristically soft and velvety line in
the final print.
Engraving - Printing technique
in which an intaglio image is produced by cutting a
metal plate or box directly with a sharp engraving tool.
The incised lines are inked and printed with heavy pressure.
|